Category: Buildings

Introducing what will hopefully be our first of many products. We have been working on the design for this bridge for a while now and we are almost ready to start selling them. This is …

  With the roof firmly glued into place to keep everything else from moving, the holes in the walls for the bay windows were cut using the hole saw. The dormer portion of the bay windows was …

With its large windows, this building is intended to be a restaurant or some other public access business. We're toying with the idea of a +1 to hunger rolls for its terrain dataslate, but that might …

  This project was made with two sizes of PVC pipes and some scrap pieces of wood (hard foam would have worked just as well). The first step was to cut the smaller pipe in half, then …

We finally finished our first set of master molds, so we can cast the production molds and see how well they work. Making these production molds is a fairly straightforward process. Just mix the two-part …

With the main parts of the towers assembled it was now time to start adding the details to the structures. A wide variety of object can be used for this process so always keep an …

  There was no serious plan or sketches done prior to the start of this project. Our plan changed constantly as we built these structures, and our assembly of them didn't go quite as smoothly as …

These two things are in many ways opposites, and a proper balance between the two must be achieved for good terrain. Everyone has their own opinion on where that balance point should be. We here …

As a general note all of the window openings on this structure were made 2” high. This is probably a little larger than they should be scale wise, however any smaller and they would be …

Making a large multipart building is a little different than making a normal one for several different reasons. True it’s basically just a bigger version of smaller buildings, however because of its size it does …